The Dink Network

I have some problems using hard tiles around houses. When I apply hardness to one tile near the house, the whole grass near that tile gets the same hardness and I have to quit again and again so no damage is caused to the DMod. Help me someone as I have tried doing this thing for 3 days now.

this should help
quotes copied directly from:
http://members.tripod.com/ostp/dmodhelp.htm#8.

"If you want to add a house to your DMOD, you'll notice that the hardbox isn't the way that you want it to be. This depends on that the hardboxes must be rectangular. And as you might have noticed, the houses are not. The best way to fix this problem is to press "H" for hardness edit mode, this will only work when your in tile edit mode. Now you can, by pressing "[" and "]", cycle through the about 800 different hardboxes. Find hardboxes that fits your needs and just stamp them into place by pressing "S". "

You can also copy hardboxes from tiles by pressing "c" and stamping it.

hope this helps

Hardnesses are very neccessary for dmod's. My attempt is just make the hardness by pressing "h" and search trough all hardnesses and just use the one you need.

I bet you're editing the tile hardness... you're supposed to edit the screen's hardness, not the hardness of single tiles. Press H to go into the screen hardness mode.

I go into the screen hardness mode and then I select the tile to which I want to apply the hardness to (it is a patch of grass) and the change takes place to all the tiles.How do we edit the screens hardness?Please tell me.

You should not press enter this is a tile-hardness editor.

Select the hardness using [ and ] and press S to stamp. Much like browsing through sprite pages and then stamping a tile.

Thaks for the help, I was pressing enter while in the tile-hardness mode.